[ Return to Contents | Post a Reply | Post a new message ]

Just use a garbage can for a test tank. Adjust the trailer and motor so that you can get the can under it while the motor is in the down position, and fill it with water. Start the motor, and everthing should be fine. Make sure you get everything where you want it before you fill the can with water, since it is a bit heavy after it is full. The motor should be close to level, or you may cause problems with the carbs if it is tipped very far.

Message Thread:

• Flushing a jet outboard pblackb592 Mar 17 2006
  • flushing a jet swampdonkey Mar 17 2006
    • jet pump flushing bkmail Mar 17 2006
      • Do what BK said Snowwolfe Mar 20 2006
      • Test Tank jrogers Mar 17 2006